How to Fix Headliner in Your Jeep

How to Fix Headliner in Your Jeep

When it comes to maintaining your Jeep, the headliner is one of the most important aspects that should not be overlooked. The headliner is essential, as it contributes to your Jeep’s interior’s overall look and feel. It also helps reduce noise levels while driving and provides a more comfortable ride. Unfortunately, due to its location, it can often become damaged or stained over time due to exposure to dirt and dust. If this has happened to you, you may need to replace or fix your Jeep’s headliner. This article will provide a step-by-step guide on fixing your Jeep headliner and keeping it looking at its best. We’ll discuss how you can repair any damages that have occurred and replace any parts if needed. With these tips in mind, we hope you can restore your Jeep’s headliner quickly and effectively so that you can enjoy a great ride again!

Tools and Materials Needed for the Job

Before you start, you’ll need to gather the materials needed to complete this job. Having an assistant who can help hold things in place while you work will be helpful. You’ll also need a few tools and materials, such as:

  • Masking tape
  • Utility knife
  • Scissors
  • Headliner fabric or material
  • Spray adhesive
  • Foam brush
  • Upholstery pins or staples

Once you have all these tools and materials ready, you’ll be prepared to start on your Jeep’s headliner repair.

Removing the Old Headliner

Once you’ve gathered all the essential tools and materials, you can begin by taking out the current headliner from your Jeep. Start by taking off any trim pieces that may be attached, such as visors or other interior parts. Have your masking tape handy to secure these parts safely while you work. Next, use a utility knife to gently cut through any staples or glue holding the headliner in place. It will help loosen up the material so it can easily be removed without damaging anything else inside your Jeep’s interior. With the old headliner removed, check for any damages that may need to be repaired before installing a new one. If there are rips or tears in this area, use patch kits designed specifically for automotive fabrics or vinyl before continuing with this project. Also read how to safely remove paint from car interior.

How to Fix Headliner in Your Jeep Cutting and Installing the New Headliner

Now that you’ve removed all excess material and repaired any damages, it’s time to cut and install your new headliner fabric. Start by measuring the size of your Jeep’s interior roof area with a tape measure. Consider any curves or angles that may need special cuts to fit properly. Once you have these measurements, cut the fabric to fit exactly so it will lay flat against your roof. Before moving on to the installation process, apply some spray adhesive onto one side of your new headliner fabric. It will help keep it in place while you work on installing it into your Jeep. Carefully lay down each section of fabric one by one, securing it in place and smoothing out any wrinkles or bumps using a foam brush. Once each piece is securely placed, use upholstery pins or staples on the edges to keep everything firmly attached while drying.

Adding Trim and Finishing Touches

Once the new headliner is installed, it’s time to add any trim or other details you may want to complete the look. If any pieces of fabric need to be tucked in, use the utility knife to cut away any excess material carefully. Then, use scissors to trim off any overlapping edges. If you have a visor or other parts you removed earlier, put them back in place with masking tape before adding in your trim pieces. It will help keep everything securely attached while you work on adding your trim pieces. Once everything is finished, use a damp cloth to wipe away any excess adhesive and clean off your headliner for a fresh look!


Fixing your Jeep’s headliner can be challenging, but with this step-by-step guide, you can have it look like new in no time. Begin by assembling all the required tools and supplies needed for the task. Then, carefully remove any existing headliner and repair any damages. Cut and install your new headliner fabric in sections, using spray adhesive to keep it in place while you work. Finally, add any trim pieces you want before wiping everything down with a damp cloth. With these steps in mind, you can easily repair and replace your Jeep’s headliner so that it looks great again!

About the author

Andy Shane

Add Comment

Click here to post a comment