Off-road

How to Use a Portable Air Compressor for Jeep

Most of us drive vehicles daily, to work, school, restaurant, and where not. Even though the vehicle models may differ, but the issues related to the vehicle remain the same. It does not matter if you drive a Jeep Wrangler or Ford Tundra – the notion of a flat tire is an unpleasant problem most drivers have to deal at one time or another.
how to use portable air compressor

Even though flat tire or an underinflated tire are very common problems, not every driver is proficient enough to fix the issue on his or her own. What is more, not all drivers have a portable air compressor in the trunk, besides at times, those who do – rarely know how to use it well. If you belong to either category, then this review for you. Today we are going to talk about the ways how to use a portable air compressor for tires correctly in times of need.

Step 1 – Pressure Check

Unless the tire is completely flat, it is hard to tell whether it is underinflated or normal. That is why the first thing you can do before reaching out for the compressor is to start with checking the tire pressure. The process is very simple in its core since all that you require is a digital pressure gauge. In case you still do not have one – it is high time you purchase it because, without it, you won’t be able to tell if your tire is good to go or not.

Pressure CheckA word of advice would be to measure the pressure only when the tires are completely cold because hot tires always show higher pressure than it actually is. If it is your first Jeep, you may not know about the tire pressure required. However, all you need is your manufacturer’s manual, which contains the right information on best-allowed tire pressure.

After you check the actual pressure with the one that is stated in the manual, you can figure out if the tires require inflation or not. If it does, you should proceed to the next step.

Step 2 – Filling the Tire

The truth is that there are two ways to inflate your Jeep JK Tires. The first one is to take the vehicle to the garage where car technicians will do it for you. The second one requires you to have a portable air compressor in your trunk. If it were for us to pick, we would pick the latter option since you never know where the mishap can happen to you. This is how the process looks like:

  • 1. Attach the compressor to the tire valve.
  • 2. Turn it on.
  • 3. Monitor the pressure gauge.
  • 4. Stop the compression at the necessary PSI point.
  • 5. Disconnect the compressor.

The inflation process itself is very simple. If you want to see in full detail how portable air compressor works, all you need is to follow the link:

Surely, before you jump to purchasing just any portable air compressor, you should know how much is a portable air compressor worth. The very same goes for the question as to what is the best portable air compressor for the tires in use. You can easily learn some more information about the Best Portable Air Compressor for Jeep on our website. As simple as that!

Conclusion

You should never underestimate the value of a good portable air compressor. The better your tires are inflated – the safer you are when on the road!

About the author

Andy Shane

My name is Andy Shane, and I like to spend my free time conquering the most difficult off-road tracks. Off-road vehicles fascinate me more than any other vehicles types. Surely, there are not so many people who would share the passion for getting out of all possible muds and wilderness in their Jeeps, but those who do will find lots of interesting information in my blog.

Add Comment

Click here to post a comment